Generally, the surface of aluminum profile products will become bright, wear resistant, corrosion resistant and easy to clean after anodic oxidation treatment. Can be comparable to stainless steel, and price and quality is better than stainless steel. Therefore, aluminum profile is more favored by everyone. As for the aluminum profile in the end need to maintain? The answer is yes.
So, how to carry out daily maintenance of aluminum profiles?
1. Although corrosion resistance and wear resistance are the advantages of industrial aluminum profile products, they will also be very easy to scratch. In the process of handling, it is necessary to handle lightly, avoid bumping caused by surface damage, affecting the appearance, and pay attention to the sharp items in the storage process away from aluminum profile.
2, is the so-called dripping stone wears through, although industrial aluminum profile products corrosion resistance, but if the industrial aluminum profile soaked in water is not timely dry treatment, will leave a watermark, serious impact on the appearance. So in the transportation process, we should pay attention to waterproof measures, cover the rain cloth, beware of water. Use the process of soaking water should also be timely dry.
3. The storage environment of aluminum profile should be kept dry and well ventilated. When aluminum profile is stored, the bottom must be separated from the ground by cushion wood, and the distance between it and the ground is greater than 10cm.
4. Do not touch the measuring surface of the measuring tool with your hand, because wet dirt such as sweat on your hand will pollute the measuring surface and make it rust. Do not mix the measuring tool with other tools or metal materials to avoid damaging the measuring tool.
5. When the workpiece surface has burrs, it is necessary to remove the burrs and then measure, otherwise it will make the measuring tool wear, and it will affect the accuracy of the measurement results.
6. Do not use the tip of the caliper as a needle, compass or other tools. Do not twist the two claws or use the measuring tool as a card.
Post time: Jan-05-2023